After spending long hours and thousands of dollars building that high powered engine, you need a quality clutch that can properly transfer that power into motion. Count on ACT clutches for quality, performance and affordability.
ACT recognizes that every driver and engine set-up is unique, so a variety of complete clutch kits and components are offered to match virtually any situation. ACT’s complete clutch kits include a pressure plate, disc, release bearing, and (in most cases) a pilot bearing and alignment tool. The kit guide on the next page will help you select the ACT kit that best fits your needs. The following pages include ACT clutch kits and components listed by application. Torque capacities are provided for every clutch combination. When a specific flywheel is required for an ACT Clutch, it will be designated in the chart for your convenience.
Consider carefully which clutch is right for your car. First you need a clutch that will hold all the power, but not too excessive. For street use, you also need a long lasting clutch that has a positive feel, smooth engagement and quiet operation. For racing, you need a tough clutch that will enable quick shifts and hard slips all the way to the finish line.
|
chrysler Clutch Kits
 |
 |
DN2-HDG4
 
$822.18
|
 Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (included in kit)
If you wish to purchase the replacement kit that does not include the flywheel
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDG4 |
Conversion kit - includes flywheel |
$822.18 [add to cart] |
| DN5-HDG4 |
Conversion kit - does not include flywheel |
$523.18 [add to cart] |
|
DN2-HDG6
$844.67
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street, Increased torque capacity and spline life, Very good durability and good spline life, Quiet operation, reduced driveline shock
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (included in kit)
If you wish to purchase the replacement kit that does not include the flywheel
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDG6 |
Conversion kit - includes flywheel |
$844.67 [add to cart] |
| DN5-HDG6 |
Conversion kit - does not include flywheel |
$545.67 [add to cart] |
|
DN2-HDR4
$792.04
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing, Increased torque capacity, Fastest shifts, low inertia, Good durability but shortened spline life, Harsh engagement, chatter. Not recommended for street use.
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (included in kit)
If you wish to purchase the replacement kit that does not include the flywheel
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDR4 |
Conversion kit - includes flywheel |
$792.04 [add to cart] |
| DN5-HDR4 |
Conversion kit - does not include flywheel |
$493.04 [add to cart] |
|
DN2-HDR6
$815.15
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (6 Pad) Disc:
Increased torque capacity, Faster shifts, reduced inertia, Very good durability but shortened spline life, Absorbs more heat than 4 pad, Harsh engagement, some chatter. Not recommended for street use.
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (included in kit)
If you wish to purchase the replacement kit that does not include the flywheel
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDR6 |
Conversion kit - includes flywheel |
$815.15 [add to cart] |
| DN5-HDR6 |
Conversion kit - does not include flywheel |
$516.15 [add to cart] |
|
DN2-HDSS
$855.92
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Performance Disc:
Recommended for Street and Race, Quicker engagement, Quiet operation, Best organic friction material, improved hub and burst strength
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (included in kit)
If you wish to purchase the replacement kit that does not include the flywheel
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDSS |
Conversion kit - includes flywheel |
$855.92 [add to cart] |
| DN5-HDSS |
Conversion kit - does not include flywheel |
$556.92 [add to cart] |
|
DN5-HDG4
$523.18
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (not included in kit)
If you wish to purchase the kit with the flywheel included
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDG4 |
Conversion kit - includes flywheel |
$822.18 [add to cart] |
| DN5-HDG4 |
Conversion kit - does not include flywheel |
$523.18 [add to cart] |
|
DN5-HDG6
$545.67
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street, Increased torque capacity and spline life, Very good durability and good spline life, Quiet operation, reduced driveline shock
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (not included in kit)
If you wish to purchase the kit with the flywheel included
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDG6 |
Conversion kit - includes flywheel |
$844.67 [add to cart] |
| DN5-HDG6 |
Conversion kit - does not include flywheel |
$545.67 [add to cart] |
|
DN5-HDR4
$493.04
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing, Increased torque capacity, Fastest shifts, low inertia, Good durability but shortened spline life, Harsh engagement, chatter. Not recommended for street use.
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (not included in kit)
If you wish to purchase the kit with the flywheel included
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDR4 |
Conversion kit - includes flywheel |
$792.04 [add to cart] |
| DN5-HDR4 |
Conversion kit - does not include flywheel |
$493.04 [add to cart] |
|
DN5-HDR6
$516.15
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (6 Pad) Disc:
Increased torque capacity, Faster shifts, reduced inertia, Very good durability but shortened spline life, Absorbs more heat than 4 pad, Harsh engagement, some chatter. Not recommended for street use.
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (not included in kit)
If you wish to purchase the kit with the flywheel included
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDR6 |
Conversion kit - includes flywheel |
$815.15 [add to cart] |
| DN5-HDR6 |
Conversion kit - does not include flywheel |
$516.15 [add to cart] |
|
DN5-HDSS
$556.92
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Performance Disc:
Recommended for Street and Race, Quicker engagement, Quiet operation, Best organic friction material, improved hub and burst strength
Listed below are purchasing options and /or additional information available for your application. Please select the option that describes your vehicles configuration. If you need assistance click here for live support or contact us.
More Info
Conversion kit - replaces modular clutch.
Must use ACT Flywheel (not included in kit)
If you wish to purchase the kit with the flywheel included
please make the appropriate selection below.
| Part # |
Option |
Price |
| DN2-HDSS |
Conversion kit - includes flywheel |
$855.92 [add to cart] |
| DN5-HDSS |
Conversion kit - does not include flywheel |
$556.92 [add to cart] |
|
DC1-HDSS
$483.93
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Performance Disc:
Recommended for Street and Race, Quicker engagement, Quiet operation, Best organic friction material, improved hub and burst strength
|
MS1-HDG4
$507.25
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
|
MS1-HDR4
$477.12
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing, Increased torque capacity, Fastest shifts, low inertia, Good durability but shortened spline life, Harsh engagement, chatter. Not recommended for street use.
|
MS1-HDSS
$556.86
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Performance Disc:
Recommended for Street and Race, Quicker engagement, Quiet operation, Best organic friction material, improved hub and burst strength
|
MS1-XTG4
$632.53
|
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
|
MS1-XTR4
$602.40
|
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing, Increased torque capacity, Fastest shifts, low inertia, Good durability but shortened spline life, Harsh engagement, chatter. Not recommended for street use.
|
DC1-HDG6
$469.90
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street, Increased torque capacity and spline life, Very good durability and good spline life, Quiet operation, reduced driveline shock
|
DC1-HDR6
$433.88
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (6 Pad) Disc:
Increased torque capacity, Faster shifts, reduced inertia, Very good durability but shortened spline life, Absorbs more heat than 4 pad, Harsh engagement, some chatter. Not recommended for street use.
|
MS1-HDG6
$529.75
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street, Increased torque capacity and spline life, Very good durability and good spline life, Quiet operation, reduced driveline shock
|
MS1-HDR6
$500.23
|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%, Pedal feels stock to moderate, Many SFI Certified to insure safety
Solid Hub (6 Pad) Disc:
Increased torque capacity, Faster shifts, reduced inertia, Very good durability but shortened spline life, Absorbs more heat than 4 pad, Harsh engagement, some chatter. Not recommended for street use.
|
MS1-XTG6
$655.03
|
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street, Increased torque capacity and spline life, Very good durability and good spline life, Quiet operation, reduced driveline shock
|
MS1-XTSS
$682.14
|
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety
Performance Disc:
Recommended for Street and Race, Quicker engagement, Quiet operation, Best organic friction material, improved hub and burst strength
|
MS1-XTR6
$625.51
|
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety
Solid Hub (6 Pad) Disc:
Increased torque capacity, Faster shifts, reduced inertia, Very good durability but shortened spline life, Absorbs more heat than 4 pad, Harsh engagement, some chatter. Not recommended for street use.
|
MS1-XXG4
$651.31
|
Maxx Xtreme Pressure Plate:
Clamps load increase of 70% to 150%, Pedal feels stiff to very stiff, All SFI Certified to insure safety
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
|
MS1-XXG6
$673.81
|
Maxx Xtreme Pressure Plate:
Clamps load increase of 70% to 150%, Pedal feels stiff to very stiff, All SFI Certified to insure safety
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street, Increased torque capacity and spline life, Very good durability and good spline life, Quiet operation, reduced driveline shock
|
MS1-XXR4
$621.17
|
Maxx Xtreme Pressure Plate:
Clamps load increase of 70% to 150%, Pedal feels stiff to very stiff, All SFI Certified to insure safety
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing, Increased torque capacity, Fastest shifts, low inertia, Good durability but shortened spline life, Harsh engagement, chatter. Not recommended for street use.
|
MS1-XXR6
$644.29
|
Maxx Xtreme Pressure Plate:
Clamps load increase of 70% to 150%, Pedal feels stiff to very stiff, All SFI Certified to insure safety
Solid Hub (6 Pad) Disc:
Increased torque capacity, Faster shifts, reduced inertia, Very good durability but shortened spline life, Absorbs more heat than 4 pad, Harsh engagement, some chatter. Not recommended for street use.
|
|
